Windows
polishing

TYPES OF SERVICES

Price request

GLASS POLISHING

Glass polishing in households and buildings is a service that allows you to restore and repair defects on glass units. Glass polishing can remove scratches and stains that spoil the transparency of the glass.

Surfaces that can be improved by glass polishing:

  • Window panes – Scratches are caused by rubbing against hard material, sand or a metal object.
  • Door glasses

  • Glass furniture

  • Mirrors

  • Other glass surfaces

REMOVING SCRATCHES

Removing scratches from glass is a requested service in both households and commercial buildings. The main reasons for the occurrence of glass defects in households are construction work, careless use, washing with the wrong tools and injuries caused by children (hits, scratches, etc.). In commercial buildings, so-called construction debris often occurs, i.e. in new buildings, after the object is completed and the glass is washed, glass damage caused during the construction is revealed.

Glass scratches can be superficial or deep. There is no problem in removing superficial scratches. In the case of deeper ones, it must be assessed whether it is possible without the glass being distorted later. Distortion occurs because when removing a scratch, the surface of the glass is ground thinner and the surface of the glass remains uneven. In case of too deep scratches, it is often unreasonable to polish the glass and the glass unit should be replaced.

Different methods are used to remove scratches, depending on the depth and nature of the scratches. Deeper glass scratches are first sanded out and then the glass is polished clear. It is important to note that the complete removal of deep scratches can be difficult, and in some cases it is only possible to reduce their visibility.

Important! Damage in the corner of the glass cannot be polished.

Concrete removal

Removal of concrete from glass is common especially in new buildings, where after the construction of the object, the glass is dirty with construction mixtures during facade or interior work.

Removing petrified concrete from a glass surface is quite difficult. This requires special tools and skills. Scratching the glass with a knife or other sharp object is out of the question. There is a risk of completely ruining the glass.

Concrete removal from the glass surface takes place in three stages. First, the damage is treated with special chemistry, then it is sanded and finally the glass is polished to make the glass shine again.

Remember! Concrete, putty or plaster splashes must be removed as soon as possible and using the correct work techniques so as not to damage the glass completely.

LIME STAIN REMOVAL

Removing limescale stains helps get rid of troublesome marks caused by water on the glass. It occurs both on windows and on other glass surfaces that are constantly in contact with water, such as laundry room doors, partitions, etc.

In the case of lime stains, it is a mineral sediment. To dissolve it, special cleaning agents are used, which restore the transparency and shine of the glass. Products sold in retail stores may not completely remove limescale stains. Glass polishing is necessary to remove lime stains that have settled over a long period of time.

Good to know! To avoid lime stains and other strong dirt, we recommend covering the glasses with glass wax.

WE RESTORE BEAUTY
IN YOUR HOME

Feel joy, satisfaction and comfort when you are at home! Cosmetic improvements at an affordable price make every household beautiful and cozy.

Time reservation

FREQUENTLY ASKED QUESTIONS

We advise you to read the frequently asked questions and perhaps you will find the answer for your question. Or send us your question by filling out the form below.

To remove scratches in outdoor conditions (external facades, windows, doors), the air temperature must be above 10 degrees. It can be done indoors all year round.

Superficial damage/scratches can be repaired. In case of large and severe injuries, the glass must be replaced. To test the extent of glass damage, run your fingernail over the scratch: if the nail gets stuck in the scratch, it is a deep scratch.

This does not happen when repairing superficial scratches. If there are very deep scratches, distortion may occur, but this will only become apparent after polishing the glass.

In most cases, such spots are also removable. To assess a specific damage, we recommend consulting with our experts.

SMARTSERVICE Tallinn OÜ
Reg.no 11626464
VAT no EE101293486

Aadress: Harju maakond, Rae vald, Peetri
alevik, Tähnase tee 1, 75312
Email: info@smartservice.ee

Copyright © Uus vebileht 2021.
All Rights Reserved.

Contact form

I'd like to get a consultation

Book time

Send prices to your email

УВАЖАЕМЫЙ КЛИЕНТ,

Для бронирования времени заполните форму, после чего мы свяжемся с Вами, чтобы договорится о удобном для Вас времени.

Благодарим,
команда SMARTSERVICE

* обозначенные поля обязательны для заполнения

ПРИ ВОЗНИКНОВЕНИИ ВОПРОСОВ ЗВОНИТЕ:

ПН-ПТ 9.00-18.00

тел. 6 803 500,

Выберите представительство:

DEAR CUSTOMER,

To make a reservation, please fill out the form and we will contact you to arrange a convenient time for you.

Thanks you,
SMARTSERVICE team

* The marked fields are required

IF YOU HAVE ANY QUESTION, PLEASE DO NOT HESITATE TO CONTACT US:

Mo-Fr 9.00-18.00

Phone 6 803 500

Select the workshop: